In photography, geotagging refers to the technique of adding geographically accurate information to an image's metadata that corresponds to the location where the photograph was taken. You must have specific equipment in order to be able to use this ability. In order to geotag locations, you'll need a digital camera with an integrated GPS receiver or a camera that can link to a GPS receiver or module, as well as specific software and programs that are designed to share geotagging locations with others. Online retailers such as Amazon, eBay, and others provide reasonably priced digital cameras that include a built-in GPS receiver.
Having your camera set to clock in at an inaccurate local time is one of the simplest needs. The photographs must be saved in the JPEG format; they cannot be saved in the BMP or RAW formats, respectively. While rotating, cropping, editing, and so on, certain picture editing software loses the metadata that was created on the camera. It is recommended that you geotag your photos before you perform any modification on the images. You must be able to record timestamps and tracklogs with the GPS receiver that comes with your digital camera. Synchronize the camera time with the GPS to achieve the best possible result.
One of the most common mistakes made when geotagging photos is entering the erroneous date in the camera's settings. Double-check the camera's date settings, particularly the year, before proceeding. Simply follow the steps below to geotag the relevant photo. After you have confirmed the clock time you set, turn on the GPS receiver and wait for a good connection from four satellites; you can place the receiver anywhere you want; it is not required that you hold it in your hands. Then take the photos and constantly check that the GPS tracker is recording tracklogs of the photos you take.
After that, return to your computer and store the GPS records in the GPX format that you created earlier on. Transfer the images you took to your computer, and EasyGPS will begin writing the geotag data from the photos to your PC. Photos with a timestamp that matches the timestamp of the GPS tracking logs will be listed on the left side of the screen and will display in the correct location on the map, as seen on the right. Photos that do not correspond to the GPS tracking log will be removed from the map and deleted from the database.
The ATP photo finder is an excellent gadget for geotagging photographs. A simple, compact device that keeps track of your journey logs, battery usage, GPS location, and memory status is all you really need. In order to determine your location, the device's SiRFstarrIII chipset is employed.
It is really simple to operate this device. After turning on the GPS and allowing it to keep logs of your journey, you can shoot any photographs you like. Following that, remove the SD card from the camera and insert it into the ATP photo finder, which will automatically geotag the photos. Launch some mapping applications such as Google Earth or Bing Maps, and utilize the labeled photos to upload them to the server via their respective interfaces. Timezones are not supported by the ATP photo-finding software. You must use UTC as the time zone for this to operate, and the camera you are using must be set to the same time zone.